Shirley's Blog

baby potty part

mould — Tue, 14 Oct 2008 03:54:50 GMT

high quality plastic injection mould

mould — Tue, 14 Oct 2008 03:41:45 GMT

mould maker

mould — Mon, 08 Sep 2008 09:50:52 GMT

cavity design 3D

core 3D

PRODUCT

SEET TOOLING

3D tooling

seat product

Prototyping

mould — Mon, 08 Sep 2008 09:22:58 GMT

this part was used by air-condition with piano black paint. before set-up tooling we made this prototyping to test design and to avoid any probelom cause mould to modify.

attached picture is a bottle clamp prototyping, it is a new concept apply in all kinds of bottle to convenient carry.

plastic housing for protect electric compont.

shelf for flowers pot

mould — Tue, 12 Aug 2008 05:28:34 GMT

flower pots

mould — Tue, 12 Aug 2008 04:59:00 GMT

high quality tooling maker

mould — Mon, 04 Aug 2008 08:00:45 GMT

The Black River Company is a US / China Joint Venture corporation providing turnkey product development to distributors and assemblers worldwide. We specialize in bringing products from concept to mass production in our IP protective facility in Shanghai China.

As you know,mould making in China is generally much more affordable than in the West (about 50% lower in China) but of course the whole process has to be carefully monitored to avoid disappointments. BRC keep communication with you until end a case.

Once you set up a cooperation with BRC, we will always open ears to hear your any update information and recommendation.

So attached some of BRC work for you reference, meanwhile showing usexperience.

Product of The Black River Copmpany,Inc.(Shanghai)

mould — Mon, 07 Jul 2008 05:45:00 GMT

This part was made in The Black River Copmpany,Inc.(Shanghai).

Applicable plastic injection mould

mould — Mon, 07 Jul 2008 05:37:18 GMT

work of The Black River Copmpany,Inc.(Shanghai)

mould — Mon, 07 Jul 2008 03:35:15 GMT

this should be a housing for electric component, the surface of which has a few texture.

BRC with many years experience in plastic mould industry can design similar plastic mould or tooling for you.

FAQ-The Black River Company,Inc.(Shanghai)

mould — Fri, 04 Jul 2008 06:36:06 GMT

Does Black River have any experience in machined parts?
We have about twelve years of experience working with Chinese machine shops. We can work on projects which require up to five axis of machining.

What sort of projects are best suited to your supply lines?
We are looking for product engineering, drafting, stamping, die casting, lost wax, sand casting, plastic injection, extrusion and assembly projects.

What volumes are suitable for offshore sourcing?
Volumes should be in the 5K to 10K range per part, and multiple parts to be consolidated into one shipment to the US.

Do you need prints or samples or both?
We need prints at a minimum, preferably via email. For engineering prints we work with AutoCad, ProE, SolidWorks, Unigraphics, and RhinoCad software packages. We bill engineering out at US$50 per hour if you need some help in getting sketches into a standard engineering format.

We would also prefer to have at least six (6) samples from any project to allow us to get the part in front of multiple factories and get the best value in the shortest amount of time.

How good is the quality?
Quality depends on customer requirements and price points, but we have parts in production for the oil and gas, automotive, health & fitness, office seating, marine, and airline industries. Our inspection reports are tailored to the product and often include testing such as salt spray, pull tests, material certification, etc.
[
|http://www.blackriver.cn/faq.html#top]

plastic injection

mould — Fri, 04 Jul 2008 06:21:38 GMT

IT'S A PLASTIC WORLD

Plastic injection product design and manufacturing is how our company began. We have over a dozen years of experience in designing products for plastic injection, and a staff of six plastic injection engineers. We develop an average of 1.3 new plastic injection products (executing new mold contracts) every day at Black River.

We welcome customers to visit our plastic injection facility on site here in Shanghai. Black box IP projects are injected on site.

With all the types and grades of plastics on the market today, it can be difficult determining which material offers the best value for your project. We provide recommendations for alternative materials at time of quotation at no extra charge.

TWO DAY QUOTE

We can generally provide a quotation for multiple plastic injection parts within two days of receipt of data, material, and quantity information.

MOULDS FOR EXPORT

We export plastic injection moulds worldwide, built ready to mount and run. To date we have exported plastic injection moulds to the following countries successfully:

United States
Canada
Russia
France

• Croatia

In late 2004 our mold making shop here on site will expand to reduce turnaround for our export mold clients from five weeks to four.